Speed Formula Car 1,
Original price was: ₨ 4,000.₨ 3,299Current price is: ₨ 3,299.
Description
This is the Speed Formula Car 1, a 1:14 scale remote-controlled (R/C) vehicle designed to mimic the aesthetics of high-performance open-wheel racing. Beyond standard driving capabilities, this model features a “spray” function that simulates exhaust smoke or nitro boosts using water vapor.
Key Features & Specifications
The car is built for “Ready to Race” (RTR) out-of-the-box enjoyment. Below are the primary technical and interactive specifications:
-
Scale: 1:14 (Significant size for indoor and outdoor flat-surface use).
-
Movement Functions: Full 4-channel control—Forward, Backward, Turn Left, and Turn Right.
-
The Spray Function: The car includes an internal reservoir. By adding water (using the provided dropper or a small bottle), the car uses an ultrasonic atomizer to emit a fine mist from the rear, illuminated by LEDs to simulate exhaust flames or smoke.
-
Design Influence: The “Brawn GT” and “Superior” branding, combined with the aerodynamic front wing and large rear spoiler, draws heavy inspiration from late-2000s Formula 1 car designs.
Operating the “Spray” Effect
To ensure the longevity of the electronics and the misting mechanism, follow these steps based on the box instructions:
-
Locate the Reservoir: There is a small intake hatch usually located near the rear engine cover or the “cockpit” area.
-
Add Water Only: Use clean, room-temperature water.
Warning: Never add alcohol, oil, or flammable liquids, as these can damage the seals or create a fire hazard if the car has internal heating elements.
-
Activation: Most models in this series activate the spray via a dedicated button on the remote transmitter or automatically when accelerating.
Technical Maintenance Tips
To keep the car performing at its “Superior” peak, consider the following maintenance routine:
| Component | Action | Why? |
| Tires | Wipe with a damp cloth | Removes dust to maintain grip on smooth surfaces. |
| Water Tank | Drain after use | Prevents mineral buildup or mold inside the atomizer. |
| Battery | Disconnect when stored | Prevents “parasitic drain” which can ruin rechargeable cells. |
| Antenna | Check for kinks | Ensures maximum range and prevents signal “glitching.” |
Troubleshooting the Mist
If the “Spray” function stops working:
-
Air Bubbles: Sometimes an air bubble traps the water. Gently shake the car to prime the atomizer.
-
Battery Level: The misting function often requires high voltage. If the battery is low, the car might drive, but the sprayer will shut off to save power.
-
Clogging: If you have hard water, a tiny drop of white vinegar mixed with water can help clear mineral deposits, followed by a flush with pure water.








Reviews
There are no reviews yet.