Zippy Store

Sale!

Bunny

Original price was: ₨ 1,199.Current price is: ₨ 999.

SKU: ZIP-138 Category:

Description

That is an adorable battery-operated plush rabbit! Based on its design—the stiff, molded posture and the specific placement of the limbs—this is likely an interactive walking toy. These types of toys typically hop forward, wiggle their ears, and make a soft “squeaking” or twitching sound when turned on.

If you are looking to identify the model or maintain it, here is a breakdown of what makes these little guys tick:


Technical Characteristics & Mechanics

These toys operate on a simple but clever mechanical system. Since the plush in your image looks like a classic “jumping” rabbit model, here is the internal anatomy you’d likely find:

  • The Chassis: Underneath the fur is a hard plastic shell that houses a small DC motor and a series of gears (a gearbox).

  • The Cam Mechanism: A rotating cam or an eccentric crank is connected to the legs. As the motor spins, the cam pushes the legs down against the floor, creating a rhythmic hopping motion rather than a true walking gait.

  • The Sound Chip: Many models include a small bellows or an electronic speaker that triggers a “chirp” or “nose twitch” sound in synchronization with the hop.

Power Source

Most rabbits of this size and style (roughly 6-8 inches long) require:

  • Batteries: Usually 2 x AA batteries.

  • Compartment: Look at the rabbit’s belly. There is typically a Velcro slit or a fabric flap that hides the battery box. You will likely need a small Phillips head screwdriver to open the safety screw on the battery door.


Common Troubleshooting Tips

If your bunny isn’t hopping quite right, here is a quick guide to getting it back on its feet:

Issue Potential Cause Fix
No movement/sound Dead batteries or corrosion. Replace batteries; clean terminals with a Q-tip and a drop of white vinegar if they look crusty.
Sound but no hop Gear slippage or fur jam. Check if the fur is caught in the leg joints. Ensure the floor surface isn’t too slippery (they work best on thin carpet or matte surfaces).
Moving very slowly Low voltage. These toys are high-drain; use fresh alkaline batteries for the best performance.

Cleaning and Care

Since this is a white plush, it can attract dust easily. Because of the electronics inside:

  1. Do NOT submerge it in water. This will short out the motor and rust the gears.

  2. Surface Clean Only: Use a damp cloth with a tiny bit of mild dish soap.

  3. The “Cornstarch Trick”: If the fur gets oily or dingy, rub a little cornstarch into the fur, let it sit for 10 minutes, and then gently brush it out with a soft-bristled toothbrush.

Reviews

There are no reviews yet.

Be the first to review “Bunny”

Type To Search Here