Large Size Glock Graffiti

Description

1. Prepare the “Water Bombs” (Gel Beads)

The “Install water bomb” diagram refers to gel beads.

• Soaking: You must soak the tiny dry beads in water for at least 3–4 hours.

• Size Matters: They need to expand to about 7-8mm. If they are too small, they won’t fire; if they are too big, they’ll jam.

• Drain: Make sure to drain all excess water before loading them into the magazine or the top-feed port.

2. Loading and Priming

Looking at the right side of your box, there are three key steps:

1. Install: Drop the hydrated beads into the designated opening (usually a magazine or a hopper on top).

2. Pull Back: This is a manual spring-action toy. You need to pull the slide back (the top part of the gun) until it clicks to chamber a bead and compress the spring.

3. Fire: Press the trigger to release the spring and launch the bead.

3. Safety Tips

• Eye Protection: Even though they are water-based, these can sting. Always wear safety glasses.

• Age Rating: The box notes 14+, so keep it away from younger children who might try to eat the unexpanded beads.

• Storage: Don’t leave hydrated beads inside the toy for weeks; they can dehydrate and cause clogs.